Product Catalog
Marifoam GS
Filling and sealing voids using expanding foams.
Cavity filling foams are used to quickly fill a collapsed area to stabilize ground or seal against water or gas. High expansion rates enable results from a minimum quantity of product being transported and pumped.
Rapid foaming properties make the foam easy to use with a minimum of framework.
Marifoam® GS is specifically designed to provide the right solution for filling, consolidating and sealing in Hard Rock mines & Tunnelling.
USE:
Foam resin offers a safe and efficient alternative to bypass development when galleries collapse or large cavities form. By injecting foam directly from the gallery floor in multiple stages, unstable zones can be backfilled at a safe distance.
The expanding resin provides active support to cavity walls and creates a protective roof, allowing excavation and frame installation to advance under safe conditions. This method not only stabilizes ground and prevents further rockfalls but also ensures faster, more economical gallery recovery compared to driving a bypass.
USE:
TECHNOLOGY:
Preventing or fighting against fires.
Marifoam® GS serves as a valuable tool for sealing off old workings, goafs, and entrances, effectively isolating areas susceptible to heating or fire incidents.
These innovative products offer the advantage of remote application, even from the surface.
This capability ensures the safe creation of a foam plug, boasting an impressive overload rating of up to 50 PSI. This not only enhances operational safety but also contributes to the overall security of the mining environment by providing a robust seal against potential hazards.
USE:
TECHNOLOGY:
PHENOLIC FOAM
2 component system.
Injected with a metering pump and a mixing nozzle in a 4:1 ratio.
PRODUCTS:
ROCSIL FOAM® LS1
From 15s to 5min setting time.
From 10 to 100 times expansion rate.
ROCSIL® HD20
Cavity filling foams are used to quickly fill a collapsed area to stabilize ground or seal against water or gas. High expansion rates enable results from a minimum quantity of product being transported and pumped.
Rapid foaming properties make the foam easy to use with a minimum of framework.
Marifoam® GS is specifically designed to provide the right solution for filling, consolidating and sealing in Hard Rock mines & Tunnelling.
USE:
- Cavity Filling.
- Ground Stabilization.
- Waterproofing.
- Plug installation.
- Sealing.
Foam resin offers a safe and efficient alternative to bypass development when galleries collapse or large cavities form. By injecting foam directly from the gallery floor in multiple stages, unstable zones can be backfilled at a safe distance.
The expanding resin provides active support to cavity walls and creates a protective roof, allowing excavation and frame installation to advance under safe conditions. This method not only stabilizes ground and prevents further rockfalls but also ensures faster, more economical gallery recovery compared to driving a bypass.
USE:
- Cavity Filling.
- Ground Stabilization.
- Waterproofing.
- Plug installation.
- Sealing.
TECHNOLOGY:
UREA SILICATE FOAM
2 component system.
Injected using a metering pump and a mixing nozzle in a 1:1 ratio.
- Not water sensitive.
- High Expansion rate.
- High bonding strength.
PRODUCTS:
MARIFOAM® GS
From 30 sec to 1 min setting time.
MARIFOAM® GS
From 30 sec to 1 min setting time.
Preventing or fighting against fires.
Marifoam® GS serves as a valuable tool for sealing off old workings, goafs, and entrances, effectively isolating areas susceptible to heating or fire incidents.
These innovative products offer the advantage of remote application, even from the surface.
This capability ensures the safe creation of a foam plug, boasting an impressive overload rating of up to 50 PSI. This not only enhances operational safety but also contributes to the overall security of the mining environment by providing a robust seal against potential hazards.
USE:
- Air and gas sealing.
- Consolidation of highly fractured strata.
- Filling of cavities and roof fall.
- Erection of firewalls at a safe distance.
- Goaf sealing.
- Longwall shield recovery without recovery mesh.
TECHNOLOGY:
PHENOLIC FOAM
2 component system.
Injected with a metering pump and a mixing nozzle in a 4:1 ratio.
- Immediate foaming.
- Excellent compressive strength.
- High expansion rate.
- Fire resistant.
PRODUCTS:
ROCSIL FOAM® LS1
From 15s to 5min setting time.
From 10 to 100 times expansion rate.
ROCSIL® HD20
- When higher strengths are required.
- Plug seals rated at 50 PSI pressure overloading.